Home » Frequently Asked Questions » DivX Connected » Troubleshooting » Connected Device

Everything is black and white

Fri, 11/30/2007 - 18:42 — slightlyoffbeat
  • Content will be black and white if your television is PAL, but is
    receiving an NTSC signal (and vice-versa). Press the
    ‘Setup’ button on the remote, then press
    ‘Display’ and choose your appropriate settings.
  • If you bought your box in a region where PAL is the standard,
    then your box will default to PAL when choosing standard definition.
    The same applies for NTSC. You may change your default by pressing
    ‘Setup’ on the remote and then going to
    ‘Display’ > ‘Display settings’ >
    ‘High definition’ and choosing either NTSC 480i 4:3 (for
    NTSC) or PAL 576i 4:3 (for PAL). This will change your DivX Connected
    device’s default settings.

Connected Plug-ins

more

License Agreement

NO COMMERCIAL USE: This License Agreement grants our community members the right to use the Software downloaded from DivX Labs for personal use only in order to evaluate and provide feedback about it to DivX, Inc. Commercial use of the Software or of the work products resulting from its use is not permitted under the Terms of Use of DivX Labs.

"