Client Firmware Changelog - 1.1

Connected Client Firmware 1.1

New Features in Client 1.1:

• Cashed HDMI display resolution settings for up to 3 TVs
• Support for standard definition wide screen display setting 
• Setup menu option for USB firmware update
• Audio Settings in the Display & Audio Settings Screen to choose between 5 channels or 2 Channels Audio
• New option called “Advanced” under Display settings for all NTSC/PAL settings that were previously under “High Definition” 
• Setup menu option for USB firmware update
• Wake on LAN Support.  The device is now able to wake a PC that is running the server from standby, hibernation, and off modes if the BIOS and network adapter are configured for this feature. 
• Inactive Servers that the device has previously connected to display in Grey Text listed below all active servers
• Support for WEP hex/ascii passphrase when connecting to a wireless router 
• Option to ‘cancel’ when connecting wireless router with a WEP passphrase 
• On screen volume and mute graphics when adjusting the volume using the remote
• Long server names now have ellipses in the server list
• Added a network troubleshoot screen when no network connection is available at the time the Connected Device starts up
• Much faster firmware update mechanism (for next firmware update)
• LED’s are blanked out when connected to a server

Bug-Fixes since 1.0.1:

• Audio playback while navigating in any of the Services or Plug-ins
• Improved slideshow smoothness for the ‘Pan & Zoom’ effect
• No need to re-enter the encryption key after reconnecting to the wireless router
• The output resolution displayed in the top level Display & Audio Setting has been fixed.  It used to be incorrect for the 1080 res. Displayed 1080i when the resolution was in fact 1080p
• Refresh from screen saver no longer requires pressing any key twice to return to the UI in some cases.
• Device will not wait for wired port to time out if no wired or wireless connection is detected after power cycle. The screen "Please choose your networking method Wired or Wireless appears is now displayed right after the search for servers fails and no connectivity is detected
• The ‘Server Connection Denied’ screen has been modified to be more user friendly
• Mute audio through the mute button on the remote now works in the ‘Welcome Screen’ of the Setup wizard
• Pause/Un-pause no longer causes the audio to get out of sync
• Navigation speed is no longer impacted due to music playback
• Pressing the info button when in the top level navigation menu no longer causes the client to lose it connection to the server

SDK Related Fixes:

• SDK: Fixed issue that caused remote MP3 playback to stop prematurely
• SDK: Fixed issue that caused a playback failure for extremely long URLs
• SDK: Fixed clipping issue with scrollable panel elements

Known Issues:

• If wireless connection is lost during media playback, pressing the ‘continue’ button to reconnect to the server will display ‘connection to server denied’. The work around to this issue is to go back to the Server list screen and reselect the server. Connection will happen seamlessly.
• You may see a black screen after powering on your device once you’ve completed the update from 1.1.2.24 to 1.1.2.37. The black screen is displayed only when connected via HDMI and only stays for 8-10 seconds. This issue only happens once and right after the update. Subsequent power cycles do not display this issue.